Lubrication Products              featuring IXL products
home page about lubrication products contact information email us price list
  1. The IXL Anti-Friction Metal Conditioner is manufactured by AMBASSADOR MANUFACTURING of St. David, Arizona.

  2. The IXL Anti-Friction Metal Conditioner is designed to reduce friction, heat, and wear by up to 75%. And one of the nice things about it is that it can be used in so many places, just change the amount.

  3. The IXL can be used in ALL engines, gasoline, diesel, or propane, it can be used in transmissions, automatic or manual, differentials (rear ends), transfer gear cases, power steering, hydraulics systems, freon air conditioning system. It can also be used in generators, air compressor, lawn mowers, any place you use synthetic or petroleum base oils. IXL is even compatible with water and antifreeze. It tends to rejuvenate the seals and gaskets. It keeps the FIRM and pliable. It keeps the gaskets and seals from drying out and cracking.

  4. IXL is an 80% natural and 20% synthetic hydrocarbon compound. It DOES NOT contain any teflon (PTFE), silicon, molydeum disulfide, or graphite. It will blend with any lubricating oil or hydraulic fluid, synthetic or petroleum based.

  5. The way IXL works is that it conditions the metal 3 to 5 microns deep. the IXL penetrates into the surface of the metal. It DOES NOT bond to or build up on the surface. If you have ever seen steel under a microscope you know that the surface of steel is full of microscopic pores, pits and grooves. As the metals heat, ideally 130 to 150 degrees, the heat and pressure at the friction points causes the IXL to start penetrating the surface in such a way that it fills all the microscopic pores, pits, and scratches and creates a smooth dense surface. It reduces friction, heat, and wear by up to 75%.

  6. Friction creates heat and heat is what destroys. The heat breaks the viscosity of the oil down, that reduces the lubricity or the lubricating ability and from there on it is wear, tear, and down time.

  7. The experts tell in that about 80% of the bearing wear in an engine occurs during the first 30 seconds of a cold or dry start-up. This is when all the oil is drained down into the oil pan and VERY little oil remains in the friction points. It takes about 15 to 30 seconds to get oil circulated to ALL parts if the engine. That is THE CRITICAL TIME. A cold dry start is about the equivalent of a hard 500 mile drive as far as wear and tear on the bearings.

  8. IXL is NOT a mechanic in a bottle. If a piece of equipment is worn out, it is worn out. IXL is not going to restore it! But if there is any life left in it the IXL will certainly extend the life of it by 60 to 80%. You can add IXL to any equipment, new or used. Recommend that on new engines that the ring be seated (approx. 1500-2000 miles) before adding IXL. Note: If IXL is added before the rings are seated, the IXL will seal the cylinder walls and the face of the rings and reduce the friction to the point that the rings will NOT seat.

  9. The benefits of using IXL to reduce friction are: equipment runs cooler, better fuel mileage ( 5-10% ), better power (up to 5%), longer equipment life ( 60-80%)

  10. If you like the idea of having considerably less wear, better performance, better protection, and more efficiency, why now give IXL a try. And when you get into a situation where your equipment ABSOLUTELY HAS TO WORK, that is when you will be glad you have IXL in you equipment!!

  11. For you vehicle engine, we recommend that you use just 2 ounces of IXL per quart of oil in the crankcase initially and then use just half the amount, just 1 ounce per quart every third oil change or approx. 10,000 miles for an excellent maintenance program. You don't have to use it every oil change. Also it is amazing how much easier the engine is to start with IXL in it even at -10 degrees F, and the IXL will withstand well over 1500 degrees F.

"Material Safety Datasheets Available On Request"

IXL Anti-friction Metal Conditioner

Pro-Series 2 Cycle Engine Oil

G-710 Calcium Complex Grease with IXL

Tri-Chem AM-2010 Gas System Treatment

Tri-Chem AM-4020 Diesel Treatment

4-Sure Non Chlorinated Safety Solvent Cleaner & Degreaser

Hydro-Sol X-14 Non-toxic Cleaner & Degreaser

Kontain Odor Control

6403 Lake Drive   ~   Bremerton, WA 98312
Phone: (360) 479-3487   ~   Fax: (360) 373-1537