Typical Uses of IXL
 Gas or Diesel Engines
 Transmissions
Automatic
or Standard Gear Boxes
Transfer
Cases
Freon
Air-Conditioning Units
Turbo
Chargers
Power
Steering
Wheel
Bearings
Differentials
CV
Joints
Turbines
Out
Drives
Boats
Conveyor
Belts
Farm
Machinery
Compressors
Electric
Motors
Pumps
Hydraulic
Systems
How
IXL Works
Where
Metal Meets Metal
IXL
is transported to Friction Points in a carrier such as oil, Grease,
Freon, Hydraulic Fluid, etc. The initial treatment starts when
pressure, friction and heat (Minimum of 130 degrees) between moving
metal surfaces activate the IXL ion.
The IXL Ion Friction Fighter
IXL
penetrates 3 to 5 microns deep into the microscopic pores of ferrous
based metals. the treated surface is now denser and smoother, thereby
reducing friction by up to 75%. This surface conditioning is extremely
durable withstanding engine dry start and lubrication starvation
problems. The result in minimum metal wear, giving maximum engine, gear
and equipment life.
IXL conditions the metal not
the oil
IXL
is not a lubricate fortifier such as graphite, moly, or TFE
IXL
can not build upon itself
IXL
will not change critical tolerances
IXL
will not affect oil filters
Application Ratio
Auto
and Light Trucks
Crankcase
(initial)...........................................2 oz. per Quart
Crankcase (thereafter).....................................1 oz. per
Quart
(Retreat every 10,000 miles or third oil change)
Power Steering........................................................1
oz.only
Automatic Transmissions .......................................3 oz.
only
Manual Transmissions............................................5 oz.
only
Transfer Case.........................................................6
oz. only
Wheel Bearing & CV Joints...................................1/2
oz. only
Radiator.................................................................3
oz. only
(Retreat every 40,000 miles or annually)
Industrial
Engines, Trucks, Heavy Equipment, Machinery & Hydraulic Systems
Lubricants
up to 80 wt...........................................2 oz. per Quart
Lubricants 80 wt. &
above......................................4 oz. per Quart
Hydraulic Fluid......................................................1
oz. per Quart
2
Cycle Engines, Small Engines, Generators, Compressors, etc.
1
oz. per Quart
"Material
Safety Datasheets Available On Request"
NOTE:Prices shown above do not
reflect an 8.6% sales tax that will apply to all Washington State
residents. For larger supplies and wholesale shipments, please contact
us by email at info@lubricationproducts.com.
** Denotes FOB Yuma, Arizona
"Material
Safety Datasheets Available On Request"
|
